Secondary cleaners are designed to be installed immediately after the head pulley to remove fine carryback adhering to the belt. Secondary belt cleaners remove bulk material build-up to keep your conveyor system operating to it’s full potential.

  • MCS1 Air Bag Secondary Belt Cleaner

    The MATO MCS1 unique belt cleaning system is designed to allow the cleaner blade to act independently to conform to the conveyor belt surface. The mounting arm arrangement encompassing the air bag system allows each side of the cleaner to act independently thus providing the even distribution of cleaner blade pressure on the belt while allowing the blade to follow any variation in the belt surface. The unique concept of the MATO MCS1 belt cleaner is such that the cleaner blade is free to move on the belt, while still maintaining relatively constant pressure across its cleaning surface.
    Download Installation Instruction
    Download Technical Drawing

    Polyurethane Blades

    There are a variety of polyurethane grades to choose from to best suit the application for the cleaner whether for surface or underground mining conditions.

    Air Bag Tension

    The air bag end assembly is one of our latest designs in constant performance for belt cleaner tensioning devices. This unique design of the air bag system for primary and secondary cleaners is by far our most successful tensioning device in today’s market.
  • MCS1 Spring Tension Secondary Belt Cleaner

    The MATO MCS1 unique belt cleaning system is designed to allow the cleaner blade to act independently to conform to the conveyor belt surface. The mounting arm arrangement encompassing the tension spring system allows each side of the cleaner to act independently of each other thus providing the even distribution of cleaner blade pressure on the belt while allowing the blade to follow any variation in the belt surface. The unique concept of the MATO MCS1 belt cleaner is such that the cleaner blade is free to move on the belt, while still maintaining relatively constant pressure across its cleaning surface.
    Download Installation Instruction
    Download Technical Drawing

    Polyurethane Blades

    There are a variety of polyurethane grades to choose from to best suit the application for the cleaner whether for surface or underground mining conditions.

    Spring Tension

    The tension spring assembly allows for constant tension to be applied to the cleaner unit, to cater for blade wear or greater movement for the blade surface on the head drum. This reduces the maintenance frequency for adjustment.
  • MCS2 Air Bag Tension Secondary Belt Cleaner

    The MATO MCS2 belt cleaning unit is the multi-bladed in-line system. Each blade is individually mounted with a rubber tensioning cushion to ensure even blade pressure and constant tip contact across the belt surface.

    Tungsten Carbide Blades

    MATO offers different grades of tungsten carbide to suit each application. For example, tungsten impact where the belts have mechanically fastened joints or tungsten long life for higher speed belts with abrasive materials.

    Air Bag Tension

    The air bag end assembly is one of our latest designs in constant performance for belt cleaner tensioning devices. This unique design of the airbag system for primary and secondary cleaners is by far our most successful tensioning device in today’s market.
    Download Installation Instruction
    Download Technical Drawing
  • MCS2 Bolt Tension Secondary Belt Cleaner

    The MATO MCS2 belt cleaning unit is a multi-bladed in-line system. Each blade is individually mounted with a rubber tensioning cushion to ensure even blade pressure, and constant tip contact across the belt surface.

    Tungsten Carbide Blades

    MATO offers different grades of tungsten carbide to suit each application. For example, tungsten impact where the belts have mechanically fastened joints or tungsten long life for higher speed belts with abrasive materials.

    Bolt Tension

    The MATO standard bolt tension assembly allows for easy adjustment during the initial setup of the blade and for ongoing changes to the blade height as it wears. Bolt tension assemblies work very well with a cushioned or flexible blade system.
    Download Installation Instruction
    Download Technical Drawing
  • MCS2 Bolt Tension Stainless Secondary Belt Cleaner

    The MATO MCS2 belt cleaning unit is the multi-bladed in-line system. Each blade is individually mounted with a rubber tensioning cushion to ensure even blade pressure and constant tip contact across the belt surface.

    Tungsten Carbide Blades

    MATO offers different grades of tungsten carbide to suit each application. For example, tungsten impact where the belts have mechanically fastened joints or tungsten long life for higher speed belts with abrasive materials.

    Bolt Tension

    The MATO standard bolt tension assembly allows for easy adjustment during the initial setup of the blade and for ongoing changes to the blade height as it wears. Bolt tension assemblies work very well with a cushioned or flexible blade system.
    Download Installation Instruction
    Download Technical Drawing
  • MCS4 Air Bag Tension Secondary Belt Cleaner

    The MATO MCS4 belt cleaning unit is a multi-bladed inline system, each blade is individually mounted with a rubber tensioning cushion to ensure even blade pressure and constant tip contact across the belt surface. The cleaner is designed to be slim-lined so it can fit into almost any position, taking up the minimal amount of room possible. The MCS4 secondary cleaner is suitable for all applications and works extremely well on high speed fully vulcanised belts or mechanically fastened belts, ensuring a clog free operation. The cleaner is easy to install and maintain and can be virtually installed anywhere on the belt.
    Download Installation Instruction
    Download Technical Drawing

    Tungsten Carbide Blades

    MATO offers different grades of tungsten carbide to suit each application. For example, tungsten impact where the belts have mechanically fastened joints or tungsten long life for higher speed belts with abrasive materials.

    Air Bag Tension

    The air bag end assembly is one of our latest designs in constant performance for belt cleaner tensioning devices. This unique design of the airbag system for primary and secondary cleaners is by far our most successful tensioning device in today’s market.
  • MCS4 Bolt Tension Stainless Secondary Belt Cleaner

    The MATO MCS4 belt cleaning unit is a multi-bladed inline system, each blade is individually mounted with a rubber tensioning cushion to ensure even blade pressure and constant tip contact across the belt surface. The cleaner is designed to be slim-lined so it can fit into almost any position, taking up the minimal amount of room possible. The MCS4 secondary cleaner is suitable for all applications and works extremely well on high speed fully vulcanised belts or mechanically fastened belts, ensuring a clog-free operation.
    Download Installation Instruction
    Download Technical Drawing

    Tungsten Carbide Blades

    MATO offers different grades of tungsten carbide to suit each application. For example, tungsten impact where the belts have mechanically fastened joints, or tungsten long life for higher speed belts with abrasive materials.

    Bolt Tension

    The MATO standard bolt tension assembly allows for easy adjustment during the initial setup of the blade and for ongoing changes to the blade height as it wears. Bolt tension assemblies work very well with a cushioned or flexible blade system.

    Features and Benefits:

    • Fits into confined spaces
    • Outstanding performance on sticky material
    • Easy installation and maintenance
    • Various blade options
    • Multi-bladed with individual cushion mounts
  • MUS4 Bolt Tension Stainless Secondary Cleaner

    The MATO MUS4 belt cleaner is one of our latest designed belt cleaners and offers our M-TRAK slide on cushion and blade for easy installation and maintenance. The unique M-TRAK is designed to eliminate long maintenance down times and ensures that all blade alignments are 100% true across the entire conveyor belt width. Blade replacement is very simple with the design of the slide on and slides off principle, meaning no special tools or training is required when maintenance is performed. The MUS4 cleaner is specifically designed to be installed on conveyor systems that are either fully spliced or have mechanical belt fasteners. The MUS4 cleaner has a low minimum height requirement for installation.
    Download Installation Instruction
    Download Technical Drawing

    Polyurethane Blades

    These are 85A shore hardness, FRAS approved polyurethane.

    Bolt Tension

    The MATO standard bolt tension assembly allows for easy adjustment during the initial setup of the blade and for ongoing changes to the blade height as it wears. Bolt tension assemblies work very well with a cushioned or flexible blade system.

    Features and Benefits:

    • Easy blade replacement
    • Outstanding performance on sticky material
    • Clog free operation
    • Various blade options
    • Multi-bladed with individual cushion mounts
    • Can operate on reversing belt
  • MUS2 Air Bag Tension Secondary Belt Cleaner

    The MATO MUS2 belt cleaner is one of our latest designed belt cleaners and offers our new M-TRAK slide on cushion and blade for easy installation and maintenance. The unique M-TRAK is designed to eliminate long maintenance down times and ensures that all blade alignments are 100% true across the entire conveyor belt width. When using our new air bag tensioned end assemblies, blade replacement is very simple with the design of the slide on and slide off principle, meaning no special tools or training is required when maintenance is performed. The unique design of our MUS2 cushion is based on the principle of a parallelogram whereby the cushion also stays true to the conveyor belt’s surface and ensures the attacking angle is maintained.
    Download Installation Instruction
    Download Technical Drawing

    Cushion with Carbide Blade

    The MUS2 cleaner is specifically designed to be installed on conveyor systems that are either fully spliced or have mechanical belt fasteners. The design of our MUS2 cleaners has the tungsten carbide blade insert that can withstand the impact of mechanical fasteners which are used in most longwall applications in underground coal mining.

    Air Bag Tension

    The air bag end assembly is one of our latest designs in constant performance for belt cleaner tensioning devices. This unique design of the air bag system for primary and secondary cleaners is by far our most successful tensioning device in today’s market.
  • MUS2 Bolt Tension Secondary Belt Cleaner

    The MATO MUS2 belt cleaner is one of our latest designed belt cleaners and offers our new M-TRAK slide on cushion & blade for easy installation and maintenance. The unique M-TRAK is designed to eliminate long maintenance down times and ensures that all blade alignments are 100% true across the entire conveyor belt width. Blade replacement is very simple with the design of the slide on and slide of principle, meaning no special tools or training is required when maintenance is performed. The unique design of our MUS2 cushion is based on the principle of a parallelogram whereby the cushion also stays true to the conveyor belts surface and ensures the attacking angle is maintained.

    Cushion with Carbide Blade

    The MUS2 cleaner is specifically designed to be installed on conveyor systems that are either fully spliced or have mechanical belt fasteners. The design of our MUS2 cleaners has the tungsten carbide blade insert that can withstand the impact of mechanical fasteners which are used in most longwall applications in underground coal mining.

    Bolt Tension

    The MATO standard bolt tension assembly allows for easy adjustment during the initial setup of the blade and for ongoing changes to the blade height as it wears. Bolt tension assemblies work very well with a cushioned or flexible blade system.
  • MUS3 Air Bag Tension Secondary Belt Cleaner

    The MATO MUS3 belt cleaner is one of our latest designed belt cleaners and offers our new M-TRAK slide on cushion and blade for easy installation and maintenance. The unique M-TRAK is designed to eliminate long maintenance down times and ensures that all blade alignments are 100% true across the entire conveyor belt width. When using our air tensioned end assemblies, blade replacement is very simple with the design of the slide on and slide off principle, meaning no special tools or training is required when maintenance is performed.

    Cushion with Carbide Blades

    The MUS3 cleaner is specifically designed to be installed on conveyor systems that are either fully spliced or have mechanical belt fasteners. The design of our MUS3 cleaners has the tungsten carbide blade insert that can withstand the impact of mechanical fasteners which are used in most longwall applications in underground coal mining. One of the main features of the MUS3 cleaner is the low minimum height requirement required for this cleaner

    Air Bag Tension

    The air bag end assembly is one of our latest designs in constant performance for belt cleaner tensioning devices. This unique design of the air bag system for primary and secondary cleaners is by far our most successful tensioning device in today’s market.
  • MUS3 Bolt Tension Secondary Belt Cleaner

    The MATO MUS3 belt cleaner is one of our latest designed belt cleaners and offers our new M-TRAK slide on cushion & blade for easy installation and maintenance. The unique M-TRAK is designed to eliminate long maintenance down times and ensures that all blade alignments are 100% true across the entire conveyor belt width. Blade replacement is very simple with the design of the slide on and slide of principle, meaning no special tools or training is required when maintenance is performed. The unique design of our MUS3 cushion is based on the principle of a parallelogram whereby the cushion also stays true to the conveyor belts surface and ensures the attacking angle is maintained.
    Download Installation Instruction
    Download Technical Drawing

    Cushion with Carbide Blade

    The MUS3 cleaner is specifically designed to be installed on conveyor systems that are either fully spliced or have mechanical belt fasteners. The design of our MUS2 cleaners has the tungsten carbide blade insert that can withstand the impact of mechanical fasteners which are used in most longwall applications in underground coal mining.

    Bolt Tension

    The MATO standard bolt tension assembly allows for easy adjustment during the initial setup of the blade and for ongoing changes to the blade height as it wears. Bolt tension assemblies work very well with a cushioned or flexible blade system.
  • MUS4 Bolt Tension Stainless Secondary Cleaner

    The MATO MUS4 belt cleaner is one of our latest designed belt cleaners and offers our M-TRAK slide on cushion and blade for easy installation and maintenance. The unique M-TRAK is designed to eliminate long maintenance down times and ensures that all blade alignments are 100% true across the entire conveyor belt width. Blade replacement is very simple with the design of the slide on and slides off principle, meaning no special tools or training is required when maintenance is performed. The MUS4 cleaner is specifically designed to be installed on conveyor systems that are either fully spliced or have mechanical belt fasteners. The MUS4 cleaner has a low minimum height requirement for installation.

    Polyurethane Blades

    These are 85A shore hardness, FRAS approved polyurethane.

    Bolt Tension

    The MATO standard bolt tension assembly allows for easy adjustment during the initial setup of the blade and for ongoing changes to the blade height as it wears. Bolt tension assemblies work very well with a cushioned or flexible blade system.
    Download Technical Drawing