coal - Conveyor Technology Services

View Cart

Details

Bucket Elevators

BUCKET ELEVATORS

Centrifugal and Continuous Discharge Elevators
Bucket elevators are designed to move flowing powders or bulk solids vertically. Bucket elevators use an endless belt or chain and have a series of buckets attached to it. Bulk material is spread into an inlet hopper. Buckets dig into the material and convey it up and over the head sprocket/pulley, and then throw the material out a discharge throat. Bucket elevators are not self-feeding and are fed at a controlled rate. The buckets are usually where the chain or belt path is vertical or steeply inclined in a single plane. The buckets are returned back down to a tail pulley or sprocket at the bottom.
Bucket Elevators Specification

There are four broad classifications of bucket elevators: centrifugal, continuous, positive, and internal discharge. The most commonly used are the centrifugal and continuous discharge elevators. Conveyor Technology Services industrial bucket elevators are made in a variety of shapes, weights and sizes, all utilising centrifugal buckets or continuous buckets.
View Cart

Details

MUS4 Bolt Tension Stainless Secondary Cleaner

MUS4 Bolt Tension Stainless Secondary Cleaner
The MATO MUS4 belt cleaner is one of our latest designed belt cleaners and offers our M-TRAK slide on cushion and blade for easy installation and maintenance. The unique M-TRAK is designed to eliminate long maintenance down times and ensures that all blade alignments are 100% true across the entire conveyor belt width. Blade replacement is very simple with the design of the slide on and slides off principle, meaning no special tools or training is required when maintenance is performed. The MUS4 cleaner is specifically designed to be installed on conveyor systems that are either fully spliced or have mechanical belt fasteners. The MUS4 cleaner has a low minimum height requirement for installation.
Polyurethane Blades
These are 85A shore hardness, FRAS approved polyurethane.
Bolt Tension
The MATO standard bolt tension assembly allows for easy adjustment during the initial setup of the blade and for ongoing changes to the blade height as it wears. Bolt tension assemblies work very well with a cushioned or flexible blade system.
Download Technical Drawing
View Cart

Details

MCP1 Tungsten Bolt Tension Primary Cleaner

Bolt Tension Tungsten Carbide Pre Belt Cleaner
The MATO MCP1 Belt Cleaning Unit is an aggressive head drum cleaner consisting of a multiple blade section, in line, mounted just under the Tangential centre line of the head pulley, to remove the bulk of the carryback material to return to the main flow of product being conveyed. The MCP1 cleaner is mounted underneath the head drum to ensure no material build-up occurs on the cleaner unit, and to eliminate the risk of damage from the cleaner to the belt. Each blade is individually mounted with a rubber tensioning cushion to ensure even blade pressure across the face of the head drum. Tungsten carbide blades are used for fully Vulcanised Belts and Polyurethane Blades are used for mechanically fastened belts.
Download Installation Instruction

Download Technical Drawing

Tungsten Carbide Blades
MATO offers different grades of tungsten carbide to suit each application. For example, tungsten impact when used with aggressive products or belts, tungsten long life for high speed, abrasive, applications (not for use with mechanical fasteners).
Bolt Tension
The MATO standard bolt tension assembly allows for easy adjustment during the initial setup of the blade and for ongoing changes to the blade height as it wears. Bolt tension assemblies work very well with a cushioned or flexible blade system.
View Cart

Details

MCS2 Bolt Tension Stainless Secondary Cleaner

MCS2 Bolt Tension Stainless Secondary Belt Cleaner
The MATO MCS2 belt cleaning unit is the multi-bladed in-line system. Each blade is individually mounted with a rubber tensioning cushion to ensure even blade pressure and constant tip contact across the belt surface.
Tungsten Carbide Blades
MATO offers different grades of tungsten carbide to suit each application. For example, tungsten impact where the belts have mechanically fastened joints or tungsten long life for higher speed belts with abrasive materials.
Bolt Tension
The MATO standard bolt tension assembly allows for easy adjustment during the initial setup of the blade and for ongoing changes to the blade height as it wears. Bolt tension assemblies work very well with a cushioned or flexible blade system.
Download Installation Instruction

Download Technical Drawing