Complete range of chain sprockets for your drop forged chains and roller conveyor chains conveyor system. We stock a wide range of sprockets to complement our extensive conveyor product range. Fabricated mild, alloy & stainless steel materials and hardened teeth for additional wear resistance with high load high wear applications.
Developed to industrial standards and is available in a variety of technical specifications.
Sprockets
Most sizes from stock
Hubs machined to size and appropriate bore and keyway size
Fast delivery
Trailers
Heat treated and machined to size with appropriate bore and keyway to customers specification
The MATO MUS2 belt cleaner is one of our latest designed belt cleaners and offers our new M-TRAK slide on cushion and blade for easy installation and maintenance. The unique M-TRAK is designed to eliminate long maintenance down times and ensures that all blade alignments are 100% true across the entire conveyor belt width.
When using our new air bag tensioned end assemblies, blade replacement is very simple with the design of the slide on and slide off principle, meaning no special tools or training is required when maintenance is performed. The unique design of our MUS2 cushion is based on the principle of a parallelogram whereby the cushion also stays true to the conveyor belt’s surface and ensures the attacking angle is maintained.
The MUS2 cleaner is specifically designed to be installed on conveyor systems that are either fully spliced or have mechanical belt fasteners. The design of our MUS2 cleaners has the tungsten carbide blade insert that can withstand the impact of mechanical fasteners which are used in most longwall applications in underground coal mining.
Air Bag Tension
The air bag end assembly is one of our latest designs in constant performance for belt cleaner tensioning devices. This unique design of the air bag system for primary and secondary cleaners is by far our most successful tensioning device in today’s market.
The MATO MCS4 belt cleaning unit is a multi-bladed inline system, each blade is individually mounted with a rubber tensioning cushion to ensure even blade pressure and constant tip contact across the belt surface.
The cleaner is designed to be slim-lined so it can fit into almost any position, taking up the minimal amount of room possible.
The MCS4 secondary cleaner is suitable for all applications and works extremely well on high speed fully vulcanised belts or mechanically fastened belts, ensuring a clog free operation.
The cleaner is easy to install and maintain and can be virtually installed anywhere on the belt.
MATO offers different grades of tungsten carbide to suit each application. For example, tungsten impact where the belts have mechanically fastened joints or tungsten long life for higher speed belts with abrasive materials.
Air Bag Tension
The air bag end assembly is one of our latest designs in constant performance for belt cleaner tensioning devices. This unique design of the airbag system for primary and secondary cleaners is by far our most successful tensioning device in today’s market.
Flexal is an elastic device for products loading on belt conveyors. It consists of cross belt elastic straps which, through their flexibility and their elongation ability, absorb impact energy and weight of loaded products.
The straps, more or less numerous, are supported by a metal framework, adjustable in all 3 dimensions in order to fit the system to every trough angle, from 20 to 70°. Each strap is fitted with sliding pads made of very high molecular weight HDPE. They are replaceable and their number is flexible, depending on the application.
Pad’s fixing to the strap is designed such that its elongation is not hindered. The belt is in contact with a large number of pads which automatically distribute strains and frictions due to elastic supporting.
Very little wear and therefore long lifetime for pads
Negligible energy absorption
Extremely simple in design, FLEXAL requires no special maintenance. Working visibility and visual inspection of the condition are always possible. In most cases, pads have a very long lifetime, and their replacement requires no special skill nor special tools.
Belt Fasteners
Belt Lacing Systems & Repair Fasteners
We are one of the world's leading suppliers of mechanical fasteners used in mining & servicing the growing need for mechanical fasteners in Australia. It is the preferred choice in most mining and material handling operations worldwide, used in coal mining and hard rock applications. Our fasteners & associated products withstand the harshest conditions without compromising performance.
Belt Lacing Systems for Light Tensile Conveyor Belts up to 750 kN/m
The MATO MUS2 belt cleaner is one of our latest designed belt cleaners and offers our new M-TRAK slide on cushion & blade for easy installation and maintenance. The unique M-TRAK is designed to eliminate long maintenance down times and ensures that all blade alignments are 100% true across the entire conveyor belt width.
Blade replacement is very simple with the design of the slide on and slide of principle, meaning no special tools or training is required when maintenance is performed. The unique design of our MUS2 cushion is based on the principle of a parallelogram whereby the cushion also stays true to the conveyor belts surface and ensures the attacking angle is maintained.
Cushion with Carbide Blade
The MUS2 cleaner is specifically designed to be installed on conveyor systems that are either fully spliced or have mechanical belt fasteners. The design of our MUS2 cleaners has the tungsten carbide blade insert that can withstand the impact of mechanical fasteners which are used in most longwall applications in underground coal mining.
Bolt Tension
The MATO standard bolt tension assembly allows for easy adjustment during the initial setup of the blade and for ongoing changes to the blade height as it wears. Bolt tension assemblies work very well with a cushioned or flexible blade system.
The MATO MUR2 Diagonal Type Belt Cleaner is a simple single blade design that offers effective cleaning of the return belt, ease of maintenance and installation.
Features and Benefits:
Profile urethane, replaceable, blade offers effective cleaning and protection of return pulley.
Unique urethane tensioning system provides optimal tensioning of plough against the belt.
Ideally suited to use on belts with mechanical fasteners.
The simple design of fabricated items provides ease of installation, maintenance and blade replacement.
Durable stainless steel for a long life of fabricated components.
Bucket elevators are designed to move flowing powders or bulk solids vertically. Bucket elevators use an endless belt or chain and have a series of buckets attached to it. Bulk material is spread into an inlet hopper. Buckets dig into the material and convey it up and over the head sprocket/pulley, and then throw the material out a discharge throat. Bucket elevators are not self-feeding and are fed at a controlled rate. The buckets are usually where the chain or belt path is vertical or steeply inclined in a single plane. The buckets are returned back down to a tail pulley or sprocket at the bottom.
There are four broad classifications of bucket elevators: centrifugal, continuous, positive, and internal discharge. The most commonly used are the centrifugal and continuous discharge elevators. Conveyor Technology Services industrial bucket elevators are made in a variety of shapes, weights and sizes, all utilising centrifugal buckets or continuous buckets.
The MATO MCP1 primary belt cleaner is an aggressive head drum cleaner consisting of multiple blade sections, in line, mounted just under the tangential centre line of the head pulley, to remove the bulk of the carry back material to return to the main flow of product being conveyed.
The MCP1 cleaner is mounted underneath the head drum to ensure no material build up occurs on the cleaner unit, and to eliminate the risk of damage from the cleaner to the belt.
Each blade is individually mounted with a rubber tensioning cushion to ensure even blade pressure across the face of the head drum. Tungsten carbide blades are used for fully vulcanised belts and polyurethane blades are used for mechanically fastened belts.
There are a number of polyurethane blade grades to choose from. Polyurethane blades can be used in underground coal mines with stringent fire resistant, antistatic requirements, as well as surface applications with aggressive products being conveyed, to high temperature or even food grade applications.
Mato has also incorporated a polyurethane blade suitable for very dry applications with the polyurethane blade being used having its own inbuilt lubrication element to reduce the chances of chattering whilst running on dry conveyor belts.
Spring Tension
The tension spring assembly allows for constant tension to be applied on the cleaner unit, to cater for blade wear or greater movement for the blade surface on the head drum. This reduces the maintenance frequency for adjustment.
The MATO MUS3 belt cleaner is one of our latest designed belt cleaners and offers our new M-TRAK slide on cushion and blade for easy installation and maintenance. The unique M-TRAK is designed to eliminate long maintenance down times and ensures that all blade alignments are 100% true across the entire conveyor belt width.
When using our air tensioned end assemblies, blade replacement is very simple with the design of the slide on and slide off principle, meaning no special tools or training is required when maintenance is performed.
Cushion with Carbide Blades
The MUS3 cleaner is specifically designed to be installed on conveyor systems that are either fully spliced or have mechanical belt fasteners. The design of our MUS3 cleaners has the tungsten carbide blade insert that can withstand the impact of mechanical fasteners which are used in most longwall applications in underground coal mining. One of the main features of the MUS3 cleaner is the low minimum height requirement required for this cleaner
Air Bag Tension
The air bag end assembly is one of our latest designs in constant performance for belt cleaner tensioning devices. This unique design of the air bag system for primary and secondary cleaners is by far our most successful tensioning device in today’s market.
MCS4 Bolt Tension Stainless Secondary Belt Cleaner
The MATO MCS4 belt cleaning unit is a multi-bladed inline system, each blade is individually mounted with a rubber tensioning cushion to ensure even blade pressure and constant tip contact across the belt surface.
The cleaner is designed to be slim-lined so it can fit into almost any position, taking up the minimal amount of room possible.
The MCS4 secondary cleaner is suitable for all applications and works extremely well on high speed fully vulcanised belts or mechanically fastened belts, ensuring a clog-free operation.
MATO offers different grades of tungsten carbide to suit each application. For example, tungsten impact where the belts have mechanically fastened joints, or tungsten long life for higher speed belts with abrasive materials.
Bolt Tension
The MATO standard bolt tension assembly allows for easy adjustment during the initial setup of the blade and for ongoing changes to the blade height as it wears. Bolt tension assemblies work very well with a cushioned or flexible blade system.
Features and Benefits:
Fits into confined spaces
Outstanding performance on sticky material
Easy installation and maintenance
Various blade options
Multi-bladed with individual cushion mounts
Mato Belt Cleaner Catalogue 2017
Download Our Product Catalogue
To download the product catalogue, please provide your email address and contact information for the free access to the product PDF catalogue. Thank you!
MATO Easy Clip Catalogue 2017
Download Our Product Catalogue
To download the product catalogue, please provide your email address and contact information for the free access to the product PDF catalogue. Thank you!
Conveyor Technology - Material Handling Catalogue
Download Our Product Catalogue
To download the product catalogue, please provide your email address and contact information for the free access to the product PDF catalogue. Thank you!
Product Enquiry Form
Thank you for contacting Scavenger Supplies. Please complete the form and our sales team will contact you promptly.