-
-
MUS3 Bolt Tension Secondary Belt Cleaner
The MATO MUS3 belt cleaner is one of our latest designed belt cleaners and offers our new M-TRAK slide on cushion & blade for easy installation and maintenance. The unique M-TRAK is designed to eliminate long maintenance down times and ensures that all blade alignments are 100% true across the entire conveyor belt width. Blade replacement is very simple with the design of the slide on and slide of principle, meaning no special tools or training is required when maintenance is performed. The unique design of our MUS3 cushion is based on the principle of a parallelogram whereby the cushion also stays true to the conveyor belts surface and ensures the attacking angle is maintained.Cushion with Carbide Blade
The MUS3 cleaner is specifically designed to be installed on conveyor systems that are either fully spliced or have mechanical belt fasteners. The design of our MUS2 cleaners has the tungsten carbide blade insert that can withstand the impact of mechanical fasteners which are used in most longwall applications in underground coal mining.Bolt Tension
The MATO standard bolt tension assembly allows for easy adjustment during the initial setup of the blade and for ongoing changes to the blade height as it wears. Bolt tension assemblies work very well with a cushioned or flexible blade system. -
CONTROL UNITS
Water Control Units & Stations
Inline Water Control Unit
Spray Board:- The Inline Water Control Unit is a simple system to control the use of water sprays to operate on either belt running or product being conveyed.
Double Solenoid Water Control Manifold
Spray Board:- Our Solenoid Water Manifold is an upgraded version of our Inline Water Control Unit, to encompass a filtration station and a manual by-pass connection in case of power failures.
Ultrasonic Water Control and Belt Cleaner Control Station
Ultrasonic Control:- An ultrasonic beam senses product being conveyed to activate a variety of water or air valves for dust suppression and conveyor belt cleaner control
- The system has variable options for power supply, and function, based on either belt running or products being detected
-
Quick Release Conveyor Skirting Clamp
The challenge is always to contain spillage and control dust at the transfer point areas, regardless of the bulk material, with any conveyor belt operation. Quick release conveyor skirting clamp that help eliminate spillage and dust in the conveyor transfer point. Make it easy to eliminate loading-point spillage on any conveyor loading site. We are a recognised industry leader in conveyor skirting system products.- Skirting material is adjusted in minutes
- Clamp adjustments are made quickly, easily and safely
- Low cost
- Positive fixing
- No springs to jam or break
-
Stainless Spring Tension Pre Belt Cleaner
The MATO MCP1 primary belt cleaner is an aggressive head drum cleaner consisting of multiple blade sections, in line, mounted just under the tangential centre line of the head pulley, to remove the bulk of the carryback material to return to the main flow of product being conveyed. The MCP1 cleaner is mounted underneath the head drum to ensure no material build-up occurs on the cleaner unit, and to eliminate the risk of damage from the cleaner to the belt. Each blade is individually mounted with a rubber tensioning cushion to ensure even blade pressure across the face of the head drum. Tungsten carbide blades are used for fully vulcanised belts and polyurethane blades are used for mechanically fastened belts.Polyurethane Blades
There are a number of polyurethane blade grades to choose from. Polyurethane blades can be used in underground coal mines with stringent fire resistant, antistatic requirements, as well as surface applications with aggressive products being conveyed, to high temperature or even food grade applications. Mato has also incorporated a polyurethane blade suitable for very dry applications with the polyurethane blade being used having its own inbuilt lubrication element to reduce the chances of chattering whilst running on dry conveyor belts.Spring Tension
The tension spring assembly allows for constant tension to be applied to the cleaner unit, to cater for blade wear or greater movement for the blade surface on the head drum. This reduces the maintenance frequency for adjustment. -
MUS4 Bolt Tension Stainless Secondary Cleaner
The MATO MUS4 belt cleaner is one of our latest designed belt cleaners and offers our M-TRAK slide on cushion and blade for easy installation and maintenance. The unique M-TRAK is designed to eliminate long maintenance down times and ensures that all blade alignments are 100% true across the entire conveyor belt width. Blade replacement is very simple with the design of the slide on and slides off principle, meaning no special tools or training is required when maintenance is performed. The MUS4 cleaner is specifically designed to be installed on conveyor systems that are either fully spliced or have mechanical belt fasteners. The MUS4 cleaner has a low minimum height requirement for installation.Polyurethane Blades
These are 85A shore hardness, FRAS approved polyurethane.Bolt Tension
The MATO standard bolt tension assembly allows for easy adjustment during the initial setup of the blade and for ongoing changes to the blade height as it wears. Bolt tension assemblies work very well with a cushioned or flexible blade system. -
CONVEYOR IDLERS
Conveyor, impact & return belt idlers assemblies
Conveyor Technology Services supply conveyor idlers, impact idlers and return belt idlers assemblies, through such manufacturers as DRC Rollers, Prok Group, and Tyton Idlers, and Special roller configurations. Conveyor Technology Services supply polymer rollers. These rollers are a new generation, heavy duty alternative to steel rollers. The rollers are constructed of glass-filled fibre, high density, polyethylene (HDPE), which has proven to substantially outlast steel rollers. The significant advantages which apply to applications utilising K-Poly Conveyor Rollers are:- Less damage to belting in event of roller collapse
- Noise reduction of poly surface up to 9dba reduction over conventional steel rollers
- Wear resistant
- Reduced material build up upon roller shell
- Up to 50% lighter than conventional idlers
-
Belt Fasteners Belt Lacing Systems & Repair Fasteners
We are one of the world's leading suppliers of mechanical fasteners used in mining & servicing the growing need for mechanical fasteners in Australia. It is the preferred choice in most mining and material handling operations worldwide, used in coal mining and hard rock applications. Our fasteners & associated products withstand the harshest conditions without compromising performance. Belt Lacing Systems for High Tensile Textile Conveyor Belts above 750 kN/m -
MCS1 Air Bag Secondary Belt Cleaner
The MATO MCS1 unique belt cleaning system is designed to allow the cleaner blade to act independently to conform to the conveyor belt surface. The mounting arm arrangement encompassing the air bag system allows each side of the cleaner to act independently thus providing the even distribution of cleaner blade pressure on the belt while allowing the blade to follow any variation in the belt surface. The unique concept of the MATO MCS1 belt cleaner is such that the cleaner blade is free to move on the belt, while still maintaining relatively constant pressure across its cleaning surface.Polyurethane Blades
There are a variety of polyurethane grades to choose from to best suit the application for the cleaner whether for surface or underground mining conditions.Air Bag Tension
The air bag end assembly is one of our latest designs in constant performance for belt cleaner tensioning devices. This unique design of the air bag system for primary and secondary cleaners is by far our most successful tensioning device in today’s market. -
MCS2 Bolt Tension Stainless Secondary Belt Cleaner
The MATO MCS2 belt cleaning unit is the multi-bladed in-line system. Each blade is individually mounted with a rubber tensioning cushion to ensure even blade pressure and constant tip contact across the belt surface.Tungsten Carbide Blades
MATO offers different grades of tungsten carbide to suit each application. For example, tungsten impact where the belts have mechanically fastened joints or tungsten long life for higher speed belts with abrasive materials.Bolt Tension
The MATO standard bolt tension assembly allows for easy adjustment during the initial setup of the blade and for ongoing changes to the blade height as it wears. Bolt tension assemblies work very well with a cushioned or flexible blade system. -
SKIRTS AND GUARDS
Skirting Clamps & Safety Rail Systems
Prevent accidents and guard the conveyor belt with these quick installation time skirts and guards.- Quick Release Conveyor Skirting Clamp
- Modular Safety Rail System
Modular Safety Rail System
- Quick installation time
- Easy access to loop take up areas
- Easy access to Drive units
- 100% Retrievable
- No heavy lifting, or removing guards
- Can be used as barriers, to restrict access
-
CONVEYOR BELT MAINTENANCE
Choose from our selection of belt maintenance products including pulley lagging, conveyor skirting clamps, belt cutters, belt lifters, belt squares and track swivels. Â We use engineered products and services to provide our customers with the best solutions for their conveyor material handling. Â We offer a comprehensive selection of quality belt maintenance products for the material handling industry. We also provide customers with unsurpassed product and application support. Conveyor Technology Services is synonymous with offering innovative conveyor hardware solutions. The new technology conveyor skirt products, pulley lagging and tracking products offer significantly longer life and lower friction and will definitely reduce belt damage, plus lower your conveyor maintenance and spillage cleanup costs. -
MCS2 Air Bag Tension Secondary Belt Cleaner
The MATO MCS2 belt cleaning unit is the multi-bladed in-line system. Each blade is individually mounted with a rubber tensioning cushion to ensure even blade pressure and constant tip contact across the belt surface.Tungsten Carbide Blades
MATO offers different grades of tungsten carbide to suit each application. For example, tungsten impact where the belts have mechanically fastened joints or tungsten long life for higher speed belts with abrasive materials.Air Bag Tension
The air bag end assembly is one of our latest designs in constant performance for belt cleaner tensioning devices. This unique design of the airbag system for primary and secondary cleaners is by far our most successful tensioning device in today’s market. -
PARTS AND ACCESSORIES Repair Kits, Cutters and Covers
Our parts ensure your conveyor equipment lasts years on. We supply conveyor equipment and parts ensuring your system is productive and efficient.Belt Cutters
MR Type Belt Cutter:
Can be used for belts up to 19mm thick and is available in standard sizes of 900, 1200 and 1500mm width.Heavy Duty Belt Cutter
Can be used for belts 15-30mm thick and is available in standard sizes of 1200, 1500 and 1800mm width.Pocket Boot Covers
Long Wall Pocket Boot Covers
- Reduces excessive down time
- Keeps L/W chock base leg pockets free of debris
- No hydraulic damage to fittings or hoses
- No leg damage
- No restriction to operation
- Allows complete raising and lowering of chock canopy
MATO Poly Repair Kit
- Dual cartridge system to allow you to use only what you need
- Available in 300mL and 600mL sizes
- For applications on worn or damaged conveyor belts, mechanical fastener coverage or where a rubber repair is required
- Primers and solvents also available, for various bonding applications
Handsaver
- Provides a safe and comfortable method of handling awkward objects and saves trapped fingers and cut hands
- Flats, channels, angles, tubes, rounds, H sections, conveyor belting may all be lifted and dragged easily, safely and quickly with this versatile tool
- Corrosion resistant finish
T Square
The MATO square is used in conjunction with the belt knife for cutting the belt end square to the edge of the belt. The squaring angle contains a slot to guide the knife blade; this facilitates a straight cut and safe operation of the knife. -
MCS1 Spring Tension Secondary Belt Cleaner
The MATO MCS1 unique belt cleaning system is designed to allow the cleaner blade to act independently to conform to the conveyor belt surface. The mounting arm arrangement encompassing the tension spring system allows each side of the cleaner to act independently of each other thus providing the even distribution of cleaner blade pressure on the belt while allowing the blade to follow any variation in the belt surface. The unique concept of the MATO MCS1 belt cleaner is such that the cleaner blade is free to move on the belt, while still maintaining relatively constant pressure across its cleaning surface.Polyurethane Blades
There are a variety of polyurethane grades to choose from to best suit the application for the cleaner whether for surface or underground mining conditions.Spring Tension
The tension spring assembly allows for constant tension to be applied to the cleaner unit, to cater for blade wear or greater movement for the blade surface on the head drum. This reduces the maintenance frequency for adjustment. -
MCS2 Bolt Tension Secondary Belt Cleaner
The MATO MCS2 belt cleaning unit is a multi-bladed in-line system. Each blade is individually mounted with a rubber tensioning cushion to ensure even blade pressure, and constant tip contact across the belt surface.Tungsten Carbide Blades
MATO offers different grades of tungsten carbide to suit each application. For example, tungsten impact where the belts have mechanically fastened joints or tungsten long life for higher speed belts with abrasive materials.Bolt Tension
The MATO standard bolt tension assembly allows for easy adjustment during the initial setup of the blade and for ongoing changes to the blade height as it wears. Bolt tension assemblies work very well with a cushioned or flexible blade system.